AVR Sound Effects Processor

3:54 AM Reporter: bali 1 Response

AVR Sound Effects Processor

AVR Sound Effects Processor

This project devised by two Cornell students in 2003,they wrote: For this endeavour, we first built an input stage that will amplify the input signal, as well as bias it to 2.5V (since the ADC can only sample positive signals). The ADC (MAX1111) is controlled by the microprocessor (Mega 32) using the SPI interface which was much easier than manually configuring a port to interface with the ADC(believe me, we tried that). We set the Mega 32 to sample the input at about 12 KHz which is fast enough to meet the Nyquist requirement for analog to digital sampling. The digital effects were done using by manipulating the input (which will be discussed in the Design page) and the output is passed to a R-2R DAC to a output amplifier stage and finally, to the speaker.

source:http://www.coolcircuit.com

Read more...

PIC16F84A TEMPERATURE CONTROLLER

3:51 AM Reporter: bali 1 Response

PIC16F84A TEMPERATURE CONTROLLER

PIC 16F84A TEMPERATURE CONTROLLER

The module uses an inexpensive 8 bit Temperature Sensor the TMP37 from Analog Devices.Since the data was analog and the PIC16f84 does not have an analog input,an external ADC had to be used.Texas Instruments’ TLC549 was chosen for this.The advantage of this ADC was that it could communicate with the microcontroller serially.You may also use similar ADCs from Maxim-IC.The LCD is a normal 16×2 display which uses the Hitachi Controller HD44780

PIC 16F84A TEMPERATURE CONTROLLER
The module uses an inexpensive 8 bit Temperature Sensor the TMP37 from Analog Devices.Since the data was analog and the PIC16f84 does not have an analog input,an external ADC had to be used.Texas Instruments’ TLC549 was chosen for this.The advantage of this ADC was that it could communicate with the microcontroller serially.You may also use similar ADCs from Maxim-IC.The LCD is a normal 16×2 display which uses the Hitachi Controller HD44780


source:http://www.coolcircuit.com

Read more...

Compact standalone ECG

3:50 AM Reporter: bali 0 Responses

Compact standalone ECG

Compact standalone ECG
This project is for detecting human ECG (Electrocardiogram, or EKG). A tiny amplifier is embedded (<1ma). style="text-decoration: underline;">

source:http://www.coolcircuit.com

Read more...

Beam Robot

3:36 AM Reporter: bali 1 Response
Beam Robot Beam Robot
This robot control by PIC16F818 which has a lot of features that work well in this situation. As you can see from the Schematic and Source Listing, position pulses for the 2 servos are generated dirctly from the PIC. Also, the room light level, battery condition, and servo power draw (indicating mechanical loading) can be measured with the internal ADC.

http://www.coolcircuit.com

Read more...

PC temperature control

3:35 AM Reporter: bali 0 Responses

PC temperature control

PC temperature control
This is a standalone temperature and fan monitoring and control unit for the PC. It uses the temperature readings to adjust fan speeds in order to regulate temperature and noise. The system is flexible in that it can be configured to be either completely autonomous, or set up to be configurable. It is also highly configurable in the setting up of the features and parameters. The entire unit is controlled by the 2 Atmel Mega32 MCUs - 1 for the main control unit and 1 for the RF remote control, with inputs to the ADC (for thermal sensors), port pins, RS232 serial connection and output to the LCD, port pins and RS232 serial connection. The RF remote control controls specific settings of the unit. The main unit is powered off a standard 4-pin PC Molex power connector while the remote control is powered off a 9V battery.

source:http://www.coolcircuit.com

Read more...

Earn money

11:52 AM Reporter: bali 0 Responses

Read more...

Hidden Surveillance Cameras

11:08 AM Reporter: bali 0 Responses



Hidden Surveillance

Cameras

Hidden surveillance cameras can be very beneficial, especially if you have a babysitter or nanny for your child. These surveillance cameras are built into ordinary devices such as smoke detectors, alarm cloc/i/Hidden Camera/sc420dv.jpgks, home security sensors, and many more. Hidden surveillance cameras are camouflaged so well that no one will ever know they are being video recorded. The only way to know for sure how your child is being treated while your away is with hidden surveillance cameras.


Thank you for visiting our site. We hope we were able to help you with your home surveillance system needs.


Source:http://www.surveillancesystemsplus.com/



Read more...

Home Alarm system

10:33 AM Reporter: bali 0 Responses


Home Alarm system

Simple, Secure, Fast and Cheap.

  • only few components
  • max security with Rolling Code TX and Shock Sensor with variable sensitivity
  • the alarm module can be assembled in only 2 hours and it don't need manual preset
  • with this characteristics is the most cheap system and the total cost could be reduced using a normal external sounder (escl. AG8)
  • GSM module will be add in the future for a remote control

Introduction

This project born to protect my house.


Transmitters

All the functions of this Home Alarm system will be activated and deactivated by this little Rolling Code

transmitter show in the photo




The Rolling Code is the most secure method to transmit data and reduce risk of scan.

With this method the serial number of any transmitter is stored in the receiver at the learning time.

This serial number is composed by many bits so to find it with a scanner it is impossible because it need many time.

Four button for these functions:
A) manual start of sound and light alarm
B) enable protection of the system
C) make a phone call (future characteristic)
D) disable protection of the system

External Sounder & Strobe

The AG8 is a microprocessor controlled external sounder with a built in strobe. It was designed for simple installation, and offers a wide variety of features and safeguards. Features include silent installation, and two flash settings, optional sounder settings (multi-sweep or two tone), selectable timer, simple testing, and diagnostic LED's that can be viewed after the covers are fitted .

· High impact polycarbonate moulding.

· Horizontal or vertical mounting.

· One standard built-in wrap around strobe lens.

· Double skin construction.

· NiCad back-up battery included.

· Multi colour options.

· Front and rear tamper.

· Two Piezo sounders.

· Dual tones.

Internal Sounder

ST-220: internal sounder with one piezo speaker

Internal signal

I use an internal red light like this one, fix up my door, to know if the alarm is active

Sensors

CTC047: magnetic contact for the door

IMPACTOR: a smart shock sensors for the door In built adjustable analyzer

  • Normal latching and non latching setting
  • Wide dynamic range of sensitivity with High-Low sensitivity setting.
  • Pulse count options, one or two pulses.
  • Power on reset
  • Requires 12 VDC
  • NC relay and red led indicator

White color, dimensions 21 x 26 x 87 mm

Alarm module

This module use these components:

  • PIC 16F877A Enhanced Flash microprocessor
  • RM4SHR-M 4 channel Rolling Code Superheterodyne Receiver Module with decoder
  • 3 x BC337 transistor
  • 3 x 12v pcb rele'
  • 3 x red micro leds
  • 1 x microswitch 2 way 2 positions
  • LM317 Adjustable Regulator
  • 7805 Positive Voltage Regulators
  • Battery 12v 20Ah
  • 3 x 1N5406 diodes
  • 5 x 1N4004 diodes
  • 3 x micro red led
  • 1 x red led
  • 1 x blue red
  • `4 x 560ohm 1/4w
  • 3 x 4700ohm 1/4w
  • 3 x 10Kohm 1/4w
  • 1 x 220ohm 1/4w
  • 1 x 1Kohm 1/4w
  • 1 x 1Kohm orizziontal trimmer
  • 2 x 18pF ceramic capacitors
  • 1 x 20MHz quartz
  • 1 x 0.1uF 63v poliester
  • 2 x 100uF 25v electr. capacitor.
  • 1 x 4700uF 35v electr. capacitor
  • 1 x Toroidal transformer 12v-0-12v 50VA

1 x 28 pin socket

Many of these components are easy to find in any electronic shop

The blue led connected to the pin RA3 of microcontroller is used like a memory to know if the alarm has been activated by an event and its reset after a reactivation.

The red led connnected to the power supply before the 1N5406 diode is used to check the power supply connection.

Offcource the other 3 microled red near the relais are used to check the output state.

Alarm module firmware

To program the 16F876A Microchip microcontroller I have used the PICKIT 2 USB Development Programmer/Debugger (cod. PG164120 or DV164121) with a cost about 40-50$.


I love the C language because it is very simple if compared to assembler.

The my C source has been compiled with HI-TECH PICC-Lite Compiler.

HI-TECH Software has provided a freeware HI-TECH PICC-Lite compiler as a tool for hobbyists and students, but the licence allows its use for commercial purposes as well. It is ideal as a teaching tool for an introduction into the 'C' language and embedded programing on a Microchip device.

Here you can download the last version 10 July 2007

Installation

setstats


Read more...

Built remote control Aeroplane

4:24 AM Reporter: bali 1 Response

Building Remote

Control

Airplanes That Rock


There is no more exciting experience than having a bunch of parts built together into a flying remote control airplane - especially if you do it all yourself. Of course building an RC model is more involved than building most of the other types of model airplanes - probably only the scale models can beat them.


Most hobbyists don't really build remote control airplanes from scratch. It's too hard because of the electronics needed. Of course if you are a radio enthusiast or an engineer you may have the chance to create the remote control system yourself, but most people won't do it.

That's why there are kits. In fact before almost-ready-to-fly and ready-to-fly model airplanes appeared, all the RC models were sold only like that - in kit form.

Types of Kits
All kits are similar - they contain parts which you should build together. What is different is the material of the parts. One of the best choices is wood - usually balsa which is light and strong.

Nowadays materials like plastic, fibreglass and foam are getting more popular. I have yet to see a kit with metal parts, but some very light metal could be a good option.

When choosing a kit, check out how it is cut. The laser-cut kits are easy to assemble and the models created from them are precious. Other types of kits are machine cut and die cut. Such are usually the wood kits and they may require some additional work on your side before you can assemble the plane.

The tools required
Some easy laser-cut plastic kits do not require any tools except a turnscrew and some glue. You may need quite small and precious turnscrew however, especially for the electronics and the engine.

If you work with machine-cut or die-cut wooden parts you will need sandpaper to fine the corpse, wings and other parts.

The glue is often included in the kits but if it is not or if you have to buy additional, pick appropriate glue for your materials. The carpenter's yellow glue is best for wood, while silicone or canopy glue are better for plastic and fibreglass kits.

At the end you will want to paint your remote control airplane. The plastic kits often come already painted, but that's never the case with wood. Before painting you may want to apply a technique called dry-brushing. It creates a realistically looking model airplanes. Sometimes dry brushing and painting are the most important things to do if you want your airplane to look good.

Of course the most important characteristic of the remote controlled airplanes is that they can fly and that you can control their flight. So when finishing your kit you must be careful not to disturb some of the fine details of the electronics or the engine.


If any one have more detail plz send us by comment

Related video



More DIY videos at 5min.com

source:http://www.articlesbase.com

Read more...

PXP looks like a PSP, emulates the classics

4:03 AM Reporter: bali 0 Responses

PXP looks like a PSP, emulates the classics

pxp.jpg

At $90, it's simply too expensive, but this PSP knockoff runs ROMS from lots of classic systems: NES, SNES, Gameboy 'n' Color, and the Megadrive/Genesis. As Gizmodo commenter Zaxxon Q Blaque points out, it appears to be a Dingoo in PSP clothing. [Chinagrabber via Technabob and Giz]


Source:http://gadgets.boingboing.net

Read more...

PeeWee, the child-resistant laptop

4:01 AM Reporter: bali 0 Responses

PeeWee, the child-resistant laptop

Picture 1.jpg

PeeWee PC is splash-resistant and has a swiveling touchscreen display: ingredients that make it perfect, all other things assumed present, for the wee ones. From the blurb:

PeeWee PC loads each Pivot Tablet Laptop with 10 age appropriate software and game titles for Pre-K, Early Elementary, or Upper Elementary students. PeeWee also includes its proprietary security suite on each laptop, giving parents full control of how and when their children use the laptop. The PeeWee security software allows parents to limit how much time their children spend browsing the internet (on a daily or weekly basis), block inappropriate sites with any version of any web browser, take screen shots, view browsing history, and even control the laptop remotely.

It's otherwise a regulation netbook, and $600.

Source:http://gadgets.boingboing.net

Read more...

A weekend with the Flip UltraHD

3:59 AM Reporter: bali 0 Responses

Review: A weekend with the Flip UltraHD

flip review.png

I spent the weekend with Pure Digital's new Flip UltraHD. It looks and feels a lot like the first-gen Flip Ultra, except it's high-def (720 pixels), has an HDMI output (really), and 16:9 widescreen. At 4.25" x 2.19" x 1.17", it's slightly bigger than the first-gen Flip Ultra and a lot bigger than the sleek MinoHD. The footprint isn't the only aspect that's bigger: instead of a 1.5" screen, the UltraHD has a vivid 2-incher. It also boasts 8 gigs of memory -- double that of the MinoHD and 4x the first-gen Ultra. It runs on two AA batteries (unlike the Mino) and costs $200 (not bad, but pricier than pocket cams from competitors like Kodak).

It was a lovely Northern California weekend, and I took these two video clips to test it in different conditions. The first (above) is of Steven after he got bonked in the head by his own surfboard, and the second (below) is of a fire pit at my friend's BBQ. I took side-by-side clips using my old Sanyo Xacti. The Flip dominated at canceling out wind noise at the beach. But when the sun set and we were sitting around a fire pit, the Flip didn't do so hot. The non-HD, 6-megapixel Xacti actually did a better job capturing the flames.

I did find, though, that I was much more inclined to pull the Flip out of my bag than the Xacti -- mainly because it's still one of the simplest, most user-friendly pocketcams out there. With little practice, I was able to navigate the controls without even looking. Since I knew I could go home and plug it into my laptop and TV without dealing with a cable or dock, I found myself reaching for it first by Sunday.

Source:http://gadgets.boingboing.net


Read more...

New MediaSmart box cuts price (and corners)

3:58 AM Reporter: bali 0 Responses

New MediaSmart box cuts price (and corners)

lx195-leak.jpg

Monolithic in design and simple in principle, HP's latest MediaSmart home server, the LX195, runs Windows HS and has a single 640GB hard drive, gigabit ethernet, a 1.GHz Atom CPU and just 1GB of RAM. Though the specs are unimpressive, it's only $390 and has 4 USB ports--consider it intermediary between high-end local backup and low-end NAS.



Source:http://gadgets.boingboing.net


Read more...

Cupertino's tablet netbook

3:56 AM Reporter: bali 0 Responses

Cupertino's tablet netbook: just a concept?

apple-media-pad-mockup-1-403x480.jpg

Illustrated by MacFormat's Adam Benton, this mockup strikes me as convincingly conservative -- but only if you accept the proposition that Apple would make it at all. I've been imagining something similar, but even smaller.


Source:http://gadgets.boingboing.net



Read more...

Technology

3:55 AM Reporter: bali 0 Responses

Technology and Telecommunications - Thomas Group Inc

Technology

Technology is so pervasive in the world today that its influence is recognized in even some of the most mundane tasks. Information technology, electronic commerce, and advanced telecommunications continue to have a major impact on the economic vitality of just about every industry. These new technologies empower companies and customers while challenging traditional business models and economic rules.

Though the sector has matured over the past 25 years, technology and telecommunications companies still face constant challenges. Access to capital, faster time-to-market, recruiting and retaining talent, and managing stakeholder and financial market expectations remain important and critical success factors. Convergence, an established trend prevalent throughout all technology industries, brings new and fundamental challenges as well.

Opportunities to improve the productivity of mergers and acquisitions, alternatives to outsourcing, and challenges of global expansion are all areas of Thomas Group's expertise.

Case Summary

Technology Case Summary - Thomas Group Inc

Thomas Group recently helped a major technology company increase its responsiveness to market needs and its ability to bring more new and innovative products to market.

As the COO of the company said, "We changed our culture, processes, and paradigms resulting in performance that was well beyond our initial beliefs.”

Thomas Group and management were able to achieved significant results:

  • Product development cycle time reduced by 33%
  • Cycle time in equipment engineering reduced by 30%
  • Time to market improved by 40%
  • On-time delivery increased from 50% to 90%
  • First pass yield (quality) improved from 70% to 95%

How Thomas Group Can Help You

Thomas Group has helped dozens of technology companies like yours to improve operations through our unique brand of functional assessment and business process improvement solutions. At Thomas Group, we help our clients better manage the intricate web of functional interdependencies that comprise a business enterprise. We teach them to organize with single-minded purpose and recognize the importance of individual contributions, and, when necessary, we help them apply technology more logically in their operations.

Source:http://www.thomasgroup.com


Read more...

Data from Space

3:43 AM Reporter: bali 1 Response

Data from Space: Adaptive Array Network Could Improve Access to NASA's Earth Observing Satellites

Sophisticated signal processing techniques and simple proof-of-principle antenna arrays built from PVC pipe, aluminum foil and copper wire could revolutionize the way NASA obtains data from its Earth observing satellites.

Graduate Research Assistant Billy Barott adjusts an antenna array being tested on the roof of the Georgia Centers for Advanced Telecommunications Technology (GCATT) building at Georgia Tech.
Georgia Tech Photo: Gary Meek

If the adaptive array system being studied by NASA and Georgia Institute of Technology researchers ultimately proves feasible, it could dramatically decrease the cost of building and maintaining ground stations, thus enabling the cost-effective construction of many more ground stations. Ultimately, that could make information from the space agency’s Earth-observing satellites more widely and rapidly available.

The “off-the-shelf” technology has already demonstrated that it can successfully receive one satellite telemetry frequency.

“The dream would be to provide total global coverage with these antenna systems and to network the systems together to make these NASA information services available to anybody sitting at a computer, almost like video-on-demand,” explained Mary Ann Ingram, a professor in Georgia Tech’s School of Electrical and Computer Engineering. “Timely information from Earth-observing satellites could be useful in many ways, such as directing operations to fight a forest fire, for instance.”

Image from EO-1 shows damage from a May 2002 tornado in LaPlata, Maryland.
Image Courtesy of NASA

Information from satellites such as Earth Observing-1 (EO-1) is now downlinked to various 11-meter dishes, primarily in the Arctic Circle, where sub-zero temperatures create maintenance and reliability issues for their complex aiming mechanisms. Typically, satellites such as EO-1 are in contact with these antenna systems between five and eight times per day for ten minutes at a time. The present antenna systems cost about $4 million each, and require resident crews to operate and maintain them.

The NASA/Georgia Tech project envisions replacing these antennas with a network of inexpensive antenna arrays that would have no moving parts and use sophisticated software – instead of careful aiming – to gather data from the satellites. The network could lower operational costs while improving access to the information.

“When people use cell phones to make calls, there are no moving parts on the antennas,” noted Dan Mandl, mission director for NASA’s EO-1 program at Goddard Space Flight Center near Washington. “What I would like to do is build a continuous cell-like network around the world that would provide almost unlimited opportunities to downlink data.”

Georgia Tech researchers pose with an antenna array being tested on the roof of the Georgia Centers for Advanced Telecommunications Technology (GCATT) building at Georgia Tech.
Georgia Tech Photo: Gary Meek
300 dpi JPG version

Mandl compared NASA’s existing downlink system to old-fashioned pay phones located off expressway exits. “If you witness an accident, you can open your cell phone and call for assistance,” he said. “But if you don’t have a cell phone, you have to get off the highway at the next exit and hunt for a pay phone. What we would like to do is give these satellites the equivalent of cell phones to allow anytime, anywhere contact.”

The proof-of-principle adaptive arrays being tested by Ingram and her research team are built from inexpensive components, including common PVC piping and aluminum foil. Signals from the four antennas are analyzed using a processing technique that learns to improve its performance by constructively combining scattered and reflected versions of the signal, and by suppressing noise and interference. That eliminates the need for costly front-end hardware and precise aiming of the antenna arrays, and allows flexibility in the location of the ground station.

Mary Ann Ingram, a professor in Georgia Tech's School of Electrical and Computer Engineering, poses with an antenna array being tested on the roof of the Georgia Centers for Advanced Telecommunications Technology (GCATT) building.
Georgia Tech Photo: Gary Meek
300 dpi JPG version

“Instead of one big aperture from an 11-meter dish, we’re going to use several smaller apertures being developed by NASA Glenn Research Center in Cleveland, in collaboration with industry and academia. We will connect them with digital signal processing,” Ingram explained. “A smaller aperture has a wider beam, so the tracking requirement won’t be as great. They may pick up interference, especially in tracking a satellite at a low elevation angle, but because we combine multiple apertures, we can null out the interference.”

The arrays individually won’t provide the same data rate as NASA’s large structures, but having more of them spread out around the world will compensate for that. Network capacity studies show that two ground stations, each with seven 0.75-meter dishes or eight electronically steered antennas, could equal the data capacity of NASA’s existing 11-meter dish at Poker Flats, Alaska – at a significantly lower cost.

Because they don’t depend on precisely aiming a dish, each array could potentially communicate with more than one satellite at a time. “What we’d really like to have is a shared antenna resource in which software is used to separate out the signals,” Mandl explained. “As we get more satellites up in space, this will become more important.”

In testing done on the Georgia Tech campus in Atlanta, the researchers were able to downlink EO-1 information in the S-band, a frequency used for transmissions at low data rates. They had to develop a special filter to eliminate interference from terrestrial repeater stations of popular satellite radio services.

Georgia Tech researchers analyze data from an antenna array being testing on the roof of the Georgia Centers for Advanced Telecommunications Technology (GCATT) building.
Georgia Tech Photo: Gary Meek
300 dpi JPG version

“We have demonstrated the lower rates in S-band, and during the upcoming year we will work on X-band for higher rates,” Mandl said. “Ultimately, we would like to target data rates in the range of 300 megabits per second. The technology could also be used in future research to implement Ka, thus enabling even higher data rates.”

To extend satellite reception time, the researchers are also examining several technical issues such as array-based synchronization and optimization of the tilt angles of the planar apertures of the electronically steered antennas. For example, this optimization could quadruple the download capacity for a ground station with eight co-located electronically steered antennas.

If successful, the adaptive array project would give NASA more flexibility in design of future high data rate satellites that may generate terabits of data on each orbit of the earth. Reliably downlinking that amount of information will require a new approach, Mandl noted.

As the project enters its third year, the following activities are planned:

  • Testing of inflatable dish antennas to be provided by NASA Glenn Research Center in collaboration with a contractor,
  • Demonstration of a 6 megabit-per-second downlink from NASA’s SAC-C satellite, and
  • Testing of electronically steered antennas being developed at the University of Colorado under a grant from NASA Glenn Research Center.

“If you are in the Arctic and the motor moving your dish breaks down, it may take a few weeks to fix it,” Mandl said. “If this could be done with no moving parts using techniques of digital signal processing and software radio, one of the most desirable features will be a high level of reliability. That’s important for space applications and locations where you can just put equipment out there and not require an operator or maintenance crew.”

This effort is funded by NASA’s Earth-Sun System Technology Office (ESTO) and represents a collaborative effort between the Georgia Institute of Technology, NASA Goddard Space Flight Center (Greenbelt, MD), NASA Glenn Research Center (Cleveland, OH), Saquish Group, Inc., and the University of Colorado at Boulder.


Source:http://gtresearchnews.gatech.edu


Read more...

Proximity card attendnace & access control system

3:00 AM Reporter: bali 1 Response

Proximity card attendnace & access control system

Swipe card Attendance system softwareRFID Proximity cards are simple and easy to use; simply presenting a card to a proximity reader is quicker and easier than swiping it. Proximity cards and readers also do not wear with each punch because no contact is made with the reader.

Popularly called as swipe card attendance system is a 125 Khz proximity card attendance device which comes with proximity card based technology and powerful time attendance software. These are used to record attendance in offices and other institutions, also these devices can be used


Source:http://planetinsignia.com/


Read more...

Fire & Intrusion alarm system

2:59 AM Reporter: bali 0 Responses

Fire & Intrusion alarm system

home security
Electronic anti-intrusion systems reliably detect anybody trying to break into a building and immediately trigger the alarm. If you want 24-hour surveillance, the system can be connected to an alarm monitoring centre.

Various products can be combined to design a intrusion and fire alram sytem such as Cctv, intrusion burglar alarm system, fire alarm system, automatic fire detection addressable & conventional


Source:http://planetinsignia.com/


Read more...

Fingerprint Attendance & Access Control device

2:58 AM Reporter: bali 0 Responses

Biometrics : Fingerprint Attendance & Access Control device

fingerprint attendanceBiometric products using fingerprint recogition technology are used as physical access control and attendance system. Insignia provides fingerprint or thumb impression technology as it is popularly know in India for the purpose of attendance marking at factories and offices. Fingerprint attendance helps to eliminate proxy punching and achieves to save on cost of employment.This technology can be used to provide secured access to offices, homes, lifts, Store room and Factories. fingerprint identification inthe most popular biometric identification technique.


Source:http://planetinsignia.com/


Read more...

Close circuit Camera Survillance system

2:57 AM Reporter: bali 2 Responses

CCTV : Close circuit Camera Survillance system

CCTV camera and DVR systemThe latest technology from CCTV Surveillance offers you high quality DVR recording systems, which can be networked together across multiple sites. CCTV Video Surveillannce Products are Dome Cameras,C/CS-Mount Cameras,WDR Cameras,IR Cameras,IR Dual Cameras,Zoom Cameras,IP Cameras, Speed Dome Cameras,DVR Cards,PC Based DVR,DVR,Entry DVR,Embedded DVR,ATM DVR,Mobile DVR,Backup Unit, Media DVR,Decoder Card,DVS Decoder,,Lens,Key Board,CCTV Accessories.


source:http://planetinsignia.com/


Read more...

The Latest in Spy Gear

12:43 AM Reporter: bali 0 Responses

The Latest in Spy Gear


Spy Gear

Spy Gear

Keeping up with the latest spy gear is a great way to make sure that you are at the cutting edge of surveillance. As technology becomes more advanced, spy gear becomes better and easier to hide. Two of the most recent developments in high tech surveillance have to do with cell phones and with GPS tracking. Both of these technologies have been around for quite some time, but the latest incarnations, cell phone bugs and the Spy Matrix GPS, offer capabilities unparalleled to this date.

Cell phone spy gear has become very sophisticated. There are mini GPS trackers that you can put in cell phones and know where that phone is. That is great for keeping track of teenagers. Additionally, they are helpful in that you can find a loved one who might be in trouble simple by seeing where the cell phone is.

However, there are even more sophisticated possibilities with cell phones. You can purchase a phone that will allow you to listen in on other people’s conversations. Simply give the phone bug to whomever you want to listen in on, and whenever they make a call, or when someone calls her or him, the phone you carry rings. The Spy Matrix GPS is the ultimate in global positioning tracking spy gear. It is the smallest real time tracker to date, and includes one of the best mapping systems on the market. Spy Matrix is so small that it can even fit in a purse. Plus, it is more portable than traditional car tracking systems. Spy gear is constantly evolving to meet the needs of those who use it.

You may also read another relative article : Security Camera


Source:http://images.google.com.pk


Read more...

Batman’s Latest Spy Technology

12:40 AM Reporter: bali 0 Responses

Batman’s Latest Spy Technology


Is this a spy cam created by the military or is it Batman’s latest gadget? Of course it’s a piece of technology made by the military; Batman is a fictitious comic book character. The Army has awarded the University of Michigan College of Engineering a five year $10 million dollar grant to develop this robotic spy plane which bears an uncanny resemblance to a bat.

It’s called the COM-BAT and it’s concept was conceived by the US military for the purpose of gathering real-time data for soldiers. The folks behind the design are also huge fans of The Dark Knight. It’s a six-inch surveillance device that is powered by solar, wind and vibrations. So much for my idea of bat droppings as fuel.


Source:http://www.gearfuse.com


Read more...

The Latest in Spy Gear

12:34 AM Reporter: bali 0 Responses

The Latest in Spy Gear

Keeping up with the latest spy gear is a great way to make sure that you are at the cutting edge of surveillance. As technology becomes more advanced, spy gear becomes better and easier to hide. Two of the most recent developments in high tech surveillance have to do with cell phones and with GPS tracking. Both of these technologies have been around for quite some time, but the latest incarnations, cell phone bugs and the Spy Matrix GPS, offer capabilities unparalleled to this date.

Cell phone spy gear has become very sophisticated. There are mini GPS trackers that you can put in cell phones and know where that phone is. That is great for keeping track of teenagers. Additionally, they are helpful in that you can find a loved one who might be in trouble simple by seeing where the cell phone is
. The Latest in Spy Gear

However, there are even more sophisticated possibilities with cell phones. You can purchase a phone that will allow you to listen in on other people’s conversations. Simply give the phone bug to whomever you want to listen in on, and whenever they make a call, or when someone calls her or him, the phone you carry rings. You can hear the whole conversation. Even better, the phone actually works as a regular cell phone, allowing you to make and receive calls.

The Spy Matrix GPS is the ultimate in global positioning tracking spy gear. It is the smallest real time tracker to date, and includes one of the best mapping systems on the market. This is technology that the spies in the CIA use. Spy Matrix is so small that it can even fit in a purse. Plus, it is more portable than traditional car tracking systems. It can be easily hidden in the car so that a thief won’t even know it is there (and thus won’t know to disable it).

Spy gear is constantly evolving to meet the needs of those who use it. Additionally, with technology advancing as it is, you will be able to do even more. But for now, cell phone bugs and the Spy Matrix GPS are top of the line products that everyone interested in surveillance should include in their spy gear.



Source:http://www.buzzle.com

Read more...

Zebco

12:26 AM Reporter: bali 0 Responses
New and Improved... Be the first to see new 2006 products by the Zebco/Quantum family

Introduction: Being one of the largest and most popular tackle manufactures, the W.C. Bradley family continues to produce new and improved fishing rods and reels for anglers to use in their entire line of brands from Zebco to Quantum. The company has made huge advances in the diversity of their lineup, brand awareness, and general popularity in the last few seasons, and TackleTour is excited to be the first to give you a sneak peek of what's to come in 2006.

ts


Zebco Saltwater Spincast Reels: The Zebco series of spincast reels has gone a long ways from the very first reel over 50 years ago to today's all new and improved designs. Though we found out Zebco will be introducing about 10 new products for 2006, there was one new series that really caught our attention....something we never thought we would ever see, a quality spincast reel designed just for saltwater applications! The all new saltwater specific spincast reels are built with saltwater worthy components and thoroughly tested in their saltwater test chamber for long term durability. The new series contain three models, 33SW, 733SW, and 808SW, that ranges from medium to medium-heavy saltwater fishing applications.



Next Generation PT Baitcast Reels: For 2006 Quantum has upped the ante by introducing the all new next generation Performance Tuned reels. We are thrilled to see these new products sport some of the latest Quantum designs and technologies for enhanced performance. For the next season we see an all new Tour Edition PT reel in both right and left-handed models. The Tour Edition PT will have a regular 6.3:1 ratio and a super-fast "Burner" gears to produce a 7.1:1 ratio for those power fishers. These will be some of the fastest reels available on the market!


In addition to the new Tour Edition PT reel, Quantum has completely redesigned a few of their most popular baitcast reels. The Energy PT gets a complete face lift and will take on the latest and greatest technologies. Like the Tour Edition PT reel, the Energy PT baitcaster will also use the new capless, screw-on handle which provides a more positive lock between the handle and crankshaft. The reel boasts improved quality and performance in an all frame that promises to be much more ergonomic.




Source:http://www.tackletour.com


Read more...

Mio C520T Satellite Navigator

12:18 AM Reporter: bali 0 Responses

Mio C520T Satellite Navigator

The wide screened Mio C520T Satellite Navigator, promises to give accurate guidance on road, with

mio-c520t-sat-nav-300x300 Mio C520T Satellite Navigator

some of the latest technologies built into it. Finding your way through the city, and reaching your destination is made easy with this portable co-pilot.

The handheld allows you to type in the post code of the location you want to reach and guides you along the way, with audio and visual signals. With the TMC feature, that comes integrated in its cradle, you can navigate around traffic jams and other obstructions, and reach your destination faster. A unique feature that the navigator offers, is its split screen, that allows you to watch a small section on the side of the screen, apart from the main navigation view. You can choose to view your next four manoeuvres or local Points of Interest or route/timing data or speed camera locations in this side view. Attending phone calls while driving is made easier as well, with the bluetooth hands-free technology. This allows linking of a blue tooth enabled mobile phone to the navigator, which switches from navigation mode to phone mode. Also, deceive speed cameras while driving, with the prior warning about their locations, given by the navigator. This service comes for free for a year after purchase. A good set of Points of Interest have been built into the device as well, which makes it easy to locate petrol bunks, cash machines, parking lots, hotels and more. The powerful SiRFstar III GPS receiver along with the MioMap v3.3 software, are employed by the device, to do a good job of picking up signals from the satellite, holding them, even amidst the city or countryside and doing necessary calculations for route guidance.

Apart from navigation, a built-in SD/MMC memory card slot, lets you listen to music, or view your pictures from an SD card as well. A USB 2.0 port is available too, to transfer data to and from a PC. Mio C520T GPS’s 1GB ROM holds Tele Atlas maps of 22 countries, which include Great Britain, Ireland and other west European countries. Multi-lingual instructions are available too, to help you with the operations of the device. The touch sensitive, 4.3” colour transflective LCD wide screen, makes viewing and operating the device very easy. The screen resolution offered is 480 x 272 pixels.

Display wise, the Mio C520T navigator, definitely seems to have made a big leap ahead. However, certain external controls like volume and mute buttons that were present in the predecessor models, have not been included here. But on the whole, the light, handy and accurate, Mio C520T Global Positioning System, might really excite the adventure spirits in you and surely make you want to “Explore More”.



Source:http://www.satellitenavigation.org.uk


Read more...

Science Info © 2008 Template by:
SkinCorner